SKU:AIO-DI-AI30PLUS-K01
AI30 Plus Dual-Hose Dry Ice Blasting Machine for Industrial Cleaning
AI30 Plus Dual-Hose Dry Ice Blasting Machine for Industrial Cleaning
Earn 3399 points by purchasing this productLearn more
◉ Shipping & Delivery
Free standard shipping is available on all products to eligible destinations in North America, Europe, Australia, and Asia.
In-stock products shipped from our U.S. warehouses typically arrive within 3–7 business days. Customized products shipped from China typically arrive within 16–22 business days.
Final fulfillment method and delivery time depend on the product, destination, and information shown at checkout.
◉ Refund Policy
Return and refund eligibility depends on the product condition, reason for return, and applicable policy terms.
◉ Warranty & Support
Every Aiolith machine is covered by the applicable manufacturer warranty and supported by our technical service team.
Coverage periods and warranty terms may vary by product. Please review the warranty information shown on the individual product page.
◉ Aftersales Support
Aiolith provides spare parts support, remote troubleshooting, operating guidance, maintenance resources, and technical assistance for our equipment.
Impossible de charger la disponibilité du service de retrait
Not sure which dry ice blaster is right for you?
Tell us what you're cleaning — we'll recommend the right machine and air compressor.
Mobile Dry Ice Blasting with Extra Reach — Same Proven AI30 Power
The AI30 Plus is the same proven AIOLITH AI30 machine, packaged with an added 26 ft extended hose alongside the standard 13 ft hose — built for mobile dry ice blasting where reach matters. Same 44 lb hopper, same anti-clogging feed, same 5 nozzles: the difference is reach — keep the machine parked while you clean farther, higher, and around large equipment, with no water, no chemicals, and no secondary waste.
Why the AI30 Plus
- Two-hose mobile kit: 13 ft for close-control work, 26 ft extended hose for mobile dry ice blasting when reach matters more than hose weight.
- Less repositioning: clean around trucks, tanks, conveyors, and large assemblies without constantly rolling the machine.
- Reaches high & confined areas: leave the unit on the floor while the operator works around ductwork, platforms, or tight aisles.
- Waterless & residue-free: dry ice sublimates on impact — nothing to clean up afterward. Well-suited to sensitive and electrical equipment when proper procedures are followed (always test a small area first).
- Compliance documentation: tested to applicable UL / IEC 60335-1 requirements, CE compliant, and manufactured under an ISO 9001:2015 quality management system. Supporting documentation available upon request.
When the 26 ft Hose Pays Off
| Job pattern | Why AI30 Plus helps |
|---|---|
| Large vehicles & machinery | Walk around trucks, trailers, and large assemblies while the machine stays parked. |
| High or overhead cleaning | Keep the machine on the ground while reaching ductwork, ceilings, or elevated molds. |
| Production lines & fixed equipment | Move along the line without repeated disconnecting and reconnecting. |
| Narrow aisles or crowded spaces | Leave the machine outside the tight area and bring only the hose to the work. |
Common Applications
- Automotive, fleet & car detailing: large trucks, trailers, undercarriages, detailing bays, and equipment where reach saves setup time.
- Manufacturing, molds & production lines: conveyors, industrial mold and tooling cleaning, and fixed equipment along a line.
- Printing & packaging: presses, rollers, ink buildup, and elevated components.
- Facilities & maintenance: overhead ducts, platforms, and hard-to-reach zones.
Before You Buy: Compressor & Dry Ice Requirements
The 26 ft hose saves time on large jobs but makes the air system more important — longer hose runs need steady CFM to hold blasting force.
| Air pressure | 87–116 psi (0.6–0.8 MPa), adjustable |
| Air flow | 71–141 CFM (2–4 m³/min) — favor the upper range for frequent 26 ft hose work |
| Recommended compressor | At least 10 kW / 15 HP with a 150 gal+ tank; stronger sustained CFM for long-hose industrial work (a larger tank buffers demand but does not replace continuous air output) |
| Dry air | Refrigerated dryer / aftercooler / moisture separator required |
| Hose routing | Keep the 26 ft hose as straight as practical — avoid tight coils and sharp bends |
| Dry ice | Fresh 3 mm or smaller pellets (sold separately) |
Note: This kit does not include dry ice pellets or an air compressor. Use ventilation and PPE — dry ice becomes CO₂ gas during cleaning. 🔧 Air Compressor Guide
Is the AI30 Plus Right for You?
The AI30 Plus is about reach. If your job doesn't need it, another model fits better:
| If your job… | Choose instead |
|---|---|
| Always stays within arm's reach of one bay | AI30 Standard — same power, no extra hose cost |
| Needs continuous industrial output (heavy rust/paint, foundry-scale) | AI50 — industrial high-flow |
| Requires abrasive media for structural rust or thick coatings | AI50 — abrasive-ready |
| Runs on a compressor that can't sustain the airflow required for your pressure, nozzle, and job | Upgrade air supply first |
Choose the AI30 Plus when reach matters — large detailing bays, printing presses, or multi-station garages where the extra 26 ft saves you from moving the machine.
Compare Models: AI30 vs AI30 Plus vs AI50
| Feature | AI30 | AI30 Plus | AI50 |
|---|---|---|---|
| Best for | Single-bay shop & detailing | Large bays & longer reach | Heavy industrial / high-volume |
| Price | $3,099 | $3,399 | $6,990 |
| Hopper | 44 lb | 44 lb | 55 lb |
| Dry ice output | 0.66–1.32 lb/min | 0.66–1.32 lb/min | 0–5.5 lb/min |
| Blasting hose | 13 ft | 13 ft + 26 ft | 16 ft |
| Air inlet hose | 13 ft | 13 ft | 32 ft |
| Air flow required | 71–141 CFM | 71–141 CFM | 200–400 CFM |
| Abrasive-ready | No | No | Yes |
| Nozzles | 5 included | 5 included | 2 industrial nozzles |
Key Specifications
| Voltage / Frequency | 110V / 60Hz |
| Hopper capacity | 44 lb (20 kg) |
| Dry ice output | 0.66–1.32 lb/min (0.3–0.6 kg/min) |
| Air input pressure | 87–116 psi (0.6–0.8 MPa), adjustable |
| Air input flow | 71–141 CFM (2–4 m³/min) |
| Blasting hoses | 13 ft standard + 26 ft extended |
| Nozzles | 5 interchangeable |
| Dimensions | 28 × 24 × 37 in (705 × 610 × 940 mm) |
| Net weight | 130 lb (excl. extra hose & packaging) |
Free Freight Shipping
Free freight shipping across the 48 contiguous U.S. states.
Estimated delivery within 3–7 business days.
Warranty
Backed by a 1-year manufacturer warranty.
Return & Refund
Important Note: This kit does not include dry ice pellets or an air compressor. Requires 3mm or smaller dry ice pellets.
Safety Tested. Compliance Documented.
To request original copies of the supporting compliance documents, please email us at sales@aiolith.com.
FAQs
Q1: What is the difference between the standard AI30 and the AI30 Plus Kit?
Q2: Does the 26ft extended hose require a larger air compressor?
Q3: In which scenarios is the 26ft extended hose highly recommended?
Q4: How does dry ice blasting compare to traditional sandblasting or chemical solvent cleaning?
Q5: Can I add other abrasives (like sand or walnut shells) to the AI30 hopper?
Q6: What is AIOLITH's warranty and return policy for the AI30?
Paste the code at checkout to enjoy the discount. One code per order. Limited quantities available.
Why Choose Aiolith?
Professional Grade Cleaning Equipment at an Affordable Price
Aiolith helps commercial facilities achieve professional
cleaning performance without the high acquisition and maintenance costs.
- Professional-Grade Performance: Built for demanding commercial cleaning
environments. - Fast Parts & Support: Responsive assistance and readily available
replacement parts. - Fast U.S. Fulfillment: Multiple warehouse locations for faster
delivery. - Reliable Quality Control: Direct manufacturing oversight for
consistent performance. - Better Value Over Time: Professional results without premium-brand
pricing.
