Limpieza con hielo seco para la industria de procesamiento de alimentos
Limpie eficazmente los equipos de producción de alimentos in situ sin desmontarlos, sin agua ni productos químicos agresivos
Why food producers are switching from water and chemical cleaning
Dry ice blasting cleans equipment in place, dry — no moisture, no chemicals, no residue.
- Added moisture that can encourage bacteria and mold
- Chemical residue and extra rinsing steps
- Water near motors, sensors and wiring
- Long drying time and production downtime
- Heavy manual scrubbing on baked-on residue
- Dry process — no added moisture for microbes
- No chemicals or secondary residue to rinse
- Clean equipment in place, with less disassembly
- Non-abrasive on seals, molds and sensors
- No drying time — faster return to production
What it cleans
- Ovens & baking equipment
- Conveyor belts
- Packaging machinery
- Mixers & blenders
- Molds & tooling
- Freezers & chillers
- Smokehouses
- Extruders
- Motors & control panels
- Seals & gaskets
- Production lines
- …and more
See it in action below ↓
-
Limpieza de moho
La limpieza con hielo seco elimina la necesidad de productos químicos y agua, eliminando a fondo los residuos de los moldes de las fábricas de alimentos sin causar daños, lo que proporciona una limpieza más rápida y segura que ayuda a mantener la higiene de los moldes y prolonga la vida útil de los equipos.
-
Limpieza de películas ácido-alcalina
La limpieza con hielo seco elimina eficazmente el aceite y las manchas de las películas resistentes a ácidos y álcalis sin dañarlas, minimiza el tiempo de inactividad y mantiene la integridad de la superficie, lo que garantiza un rendimiento óptimo y una mayor vida útil del material.
Find your setup in 4 questions
Get a machine, compressor guidance, a dry ice plan and an estimated starting price.
What are you mainly cleaning?
Your typical cleaning scale?
Air compressor?
How often will you use it?
Your recommended setup
- ⚙️Machine
- 💨Air compressor
- 🧊Dry ice plan
- ✅Best for
Estimated setup
Compressor sold separately — read the air compressor guide. Dry air treatment (dryer / separator) is required for stable blasting.
Getting set up is simple
Four steps from delivery to your first blast — plus what to have on hand.
- 1Connect air
Compressor and dry-air line to the machine.
- 2Load dry ice
3 mm pellets into the 44 lb hopper.
- 3Blast
Pellets vanish on impact, lifting grease and baked-on residue.
- 4Back in production
No water, no residue, no drying time.
What you'll need to run it
Air compressor
AI30 / AI30 Plus: 71–141 CFM.
AI50: 200–400 CFM.
Dry, clean air
A refrigerated dryer or moisture separator keeps pellets from freezing and clogging.
Dry ice pellets · 3 mm
Buy fresh locally, or make your own on demand with an AIP50 pelletizer.
How many cleanings until it pays for itself?
Dry ice cleaning saves labor and downtime on every sanitation cycle — here's a typical estimate.
Estimated payback
26 cleanings
If your plant already has a compatible air compressor, the AI30 can pay for itself in about 26 sanitation cleanings — from the labor and downtime saved every cycle.
4–6 hours of disassembly, scrubbing, rinsing & drying · line downtime · water & chemicals
Clean in place in about an hour · no water or chemicals · faster back to production
Estimates vary by equipment, soil level, local dry ice price, labor cost and downtime value. Use as a planning guide, not a guaranteed projection.
ThaiDelight Foods, Bangkok, Tailandia
“La limpieza de nuestros equipos solía significar paradas prolongadas, un uso intensivo de agua y productos químicos fuertes, todo ello mientras se corría el riesgo de contaminación bacteriana. Desde que nos cambiamos a la limpieza con hielo seco, podemos limpiar transportadores, moldes de horneado y máquinas de llenado in situ, sin desmontaje, sin agua, sin productos químicos y sin residuos. Es más rápido, reduce el tiempo de inactividad y facilita mucho la superación de las auditorías de seguridad alimentaria”.
— Somchai P., Gerente de Producción
Frequently asked questions
Is dry ice cleaning safe for food production areas?
Yes. Dry ice sublimates into CO₂ gas on impact, leaving no water, chemicals or secondary residue. It's a recognized cleaning method in food and beverage processing and is used on ovens, conveyors, molds and packaging lines. Always follow your own HACCP and sanitation protocols.
Do I need an air compressor?
Yes — it's sold separately. AI30 / AI30 Plus need 71–141 CFM at 87–116 PSI (10 HP+, 150 gal tank); AI50 needs an industrial screw compressor at 200–400 CFM. No compressor yet? See the AI30 + 20HP system.
Can I clean equipment in place, without disassembly?
In most cases, yes. Because the process is dry and non-abrasive, you can often clean ovens, conveyors and machinery in place — reducing teardown, downtime and reassembly between production runs.
Is it safe around motors, sensors and wiring?
Yes. With no moisture and no abrasive media, dry ice blasting is safe on electrical components, sensors, seals and gaskets. Start at lower pressure on sensitive surfaces and increase as needed.
Where do I get dry ice?
Buy fresh 3 mm pellets from a local CO₂ supplier before each shift, or make your own on demand with an AIP50 pelletizer and storage box.
Which model is right for my plant?
AI30 for ovens, molds and general equipment; AI30 Plus for conveyors, packaging lines and cleaning in place around large equipment; AI50 for heavy baked-on carbon and high-volume production lines. Not sure? Use the setup finder above.
Ready to bring dry ice cleaning to your plant?
Pick your machine, or talk to us about the right setup for your lines and sanitation schedule.
- ✓ 1-year warranty
- ✓ Free freight shipping
- ✓ US-based after-sales support
