Dry Ice Blasting Machine Prices: AI10–AI50 Guide (2026)
Updated September 2026
Commercial dry ice blasting machines currently range from $1,690 for the AIOLITH AI10 Micro to $7,890 for the AI50. The right machine depends on more than the purchase price: what you need to remove, how much compressed air you have, how much working reach you need, and how heavily the machine will be used.
AI10 is designed for electronics and precision cleaning with lower air demand. AI30 covers common professional work such as automotive detailing, restoration, molds and routine industrial maintenance. AI30 Plus keeps the same core cleaning platform but adds a 26 ft blasting hose for longer reach. AI50 is built for heavier industrial cleaning, higher dry ice output and abrasive-ready applications.
Quick answer: Current reference prices are AI10 Micro $1,690, AI30 $3,099, AI30 Plus $3,399, and AI50 $7,890. If you are choosing between them, start with the contamination and your available compressor CFM/PSI—not price alone.
How Much Does a Commercial Dry Ice Blasting Machine Cost?
For the current AIOLITH lineup, the machine price varies mainly with cleaning intensity, airflow demand, reach and output. The table below is the fastest way to narrow the choice.
| Model | Current Price | Air Requirement | Best Fit | Main Reason to Choose It |
|---|---|---|---|---|
| AI10 Micro | $1,690 | 27–70 CFM; up to 116 PSI | Electronics, precision parts, light residue | Lower air demand + micro-particle mode |
| AI30 | $3,099 | 71–141 CFM machine input; about 90–120 CFM recommended for regular indoor use | Automotive, restoration, molds, routine industrial cleaning | General professional cleaning |
| AI30 Plus | $3,399 | 71–141 CFM machine input; 90+ CFM indoor minimum with extra reserve preferred | Large bays, large vehicles, fixed equipment, wider work zones | 13 ft + 26 ft blasting hoses |
| AI50 | $7,890 | 175 CFM minimum; 200–400 CFM recommended | Heavy carbon, rust, paint, coatings and high-output industrial work | Up to 5.5 lb/min + abrasive-ready capability |
Prices shown are current reference prices and may change. The linked product page is the live source for current pricing and configuration.
Which Dry Ice Blaster Fits Your Job?
AI10 Micro: Precision and Electronics Cleaning
The AI10 Micro is the lowest-air-demand option in the lineup. It accepts 2.5–3 mm dry ice pellets and can work in standard pellet mode or produce approximately 0.2 mm micro-particles through its integrated ice-cutting system.
It is intended for electronics refurbishment, device cleaning, precision parts and other applications where control matters more than maximum output. Its 27–70 CFM air requirement also makes it easier to match with a smaller compressed-air setup than the larger machines. A suitable piston compressor can be compatible when it can sustain the required airflow and pressure.
AI30: General Professional Dry Ice Cleaning
The AI30 is positioned for light-to-medium professional cleaning, including automotive work, restoration, molds and tooling, and routine industrial maintenance. It has a 44 lb hopper, five nozzles and a 13 ft blasting hose.
The machine air-input range is 71–141 CFM at 87–116 PSI. For regular indoor use, about 90–120 CFM is the practical target for more stable performance.
AI30 Plus: Choose It When Reach Is the Difference
The AI30 Plus uses the same core cleaning platform as the AI30 but adds a 26 ft blasting hose in addition to the standard 13 ft hose. That extra reach is useful around large vehicles, fixed equipment, production lines, elevated areas and wider work zones where repositioning the machine repeatedly slows the job.
Because a longer hose adds system resistance, additional airflow reserve is preferred. For indoor use, 90+ CFM is the practical minimum rather than a target to operate right at the edge.
AI50: Heavy Industrial and High-Output Cleaning
The AI50 is the heavy-duty option. It is designed for applications such as heavy carbon, rust, paint, coatings, foundry work, molds, industrial equipment and restoration where the AI30 platform may not provide enough output.
AI50 requires at least 175 CFM and 200–400 CFM is recommended. It has a 55 lb hopper, output up to 5.5 lb/min, stable operating pressure of 116–232 PSI and an abrasive-ready configuration for applications that need more aggressive surface preparation.
Air Compressor Requirements Before You Buy
Compressor compatibility is one of the most important checks before buying a dry ice blaster. Do not choose from horsepower or tank size alone. What matters is whether the compressor can continuously deliver the required CFM at the required PSI.
| Model | Airflow | Pressure / Practical Note |
|---|---|---|
| AI10 | 27–70 CFM | Rated air supply up to 116 PSI |
| AI30 | 71–141 CFM machine input | 87–116 PSI; about 90–120 CFM recommended for regular indoor use |
| AI30 Plus | 71–141 CFM machine input | 90+ CFM indoor minimum; extra airflow reserve preferred for the longer hose |
| AI50 | 175 CFM minimum; 200–400 CFM recommended | 116–232 PSI stable operating range |
For a deeper explanation of airflow sizing, see How Much CFM Does a Dry Ice Blaster Need?
What Else Do You Need Besides the Machine?
The purchase price of the blaster is only one part of the working setup. Before comparing quotations, account for the following:
- Compressed air: The compressor must sustain the required CFM at operating pressure.
- Dry ice: AI10 accepts 2.5–3 mm pellets; AI30 and AI30 Plus use 3 mm or smaller dry ice; AI50 uses 3 mm pellets.
- Air quality and moisture control: Clean compressed air matters. AI10 does not normally require a separate refrigerated dryer for basic operation, but excessive oil or liquid water should be avoided. Larger systems may require moisture separation, filtration or drying depending on the compressor and environment.
- Storage: Dry ice continuously sublimates, so insulated storage and supply timing affect usable media cost.
- Safety and ventilation: Dry ice converts to CO₂ gas. Follow site ventilation, PPE and contamination-handling procedures.
If pellet size is part of your buying decision, compare 3 mm vs. 16 mm vs. 19 mm dry ice pellets.
What Does the Machine Price Include?
Included hoses, nozzles and accessories vary by model, so check the live product page before ordering. For example, AI30 includes a 13 ft blasting hose and five nozzles, while AI30 Plus adds a 26 ft blasting hose for extended reach. AI50 uses its own industrial hose and nozzle configuration.
The air compressor and dry ice supply are separate unless a specific bundle explicitly states that they are included. If you are comparing suppliers, compare the complete working configuration rather than the machine price alone.
When AI30 or AI30 Plus Is Not Enough
AI30 and AI30 Plus are best suited to light-to-medium contamination and conventional dry ice cleaning. Standard dry ice blasting is non-abrasive, so it should not be treated as a universal replacement for abrasive surface preparation.
If the job involves heavier rust, thick paint or coatings, heavy carbon, higher production output, or a process that needs abrasive capability, evaluate the AI50. Always test the process on a representative surface when substrate condition, coating adhesion or finish quality is critical.
Shipping, Support and Ownership
Commercial equipment cost should also include delivery, downtime risk and access to replacement parts. Shipping time, warranty, return terms and included accessories can vary by model and destination, so use the current product page, checkout or written quotation as the final source for your order.
Before buying, it is also worth confirming that replacement hoses, nozzles, controls and other service parts are available for the exact model you choose.
FAQ
How much does a commercial dry ice blasting machine cost?
Current AIOLITH reference prices range from $1,690 for the AI10 Micro to $7,890 for the AI50. AI30 is $3,099 and AI30 Plus is $3,399. Prices can change, so check the live product page for the current amount.
Which dry ice blaster is best for electronics?
AI10 Micro is the model designed for electronics and precision cleaning. It has a lower 27–70 CFM air requirement and can produce approximately 0.2 mm micro-particles from standard 2.5–3 mm dry ice pellets.
How much CFM does the AI30 need?
The machine input range is 71–141 CFM at 87–116 PSI. For regular indoor work, about 90–120 CFM is recommended.
Does a dry ice blasting machine include an air compressor?
Not by default. The compressor and dry ice supply are separate unless the product is sold as a specific system bundle that explicitly includes them.
Can AI30 remove heavy rust or thick coatings?
AI30 is positioned for light-to-medium cleaning. For heavier rust, paint, coatings, heavy carbon or applications needing higher output or abrasive capability, evaluate AI50 and test the process on the actual substrate.
Not Sure Which Dry Ice Blaster Fits Your Job?
Tell us what you need to remove and your compressor's CFM and PSI. We can help you compare AI10, AI30, AI30 Plus and AI50 for your application.
Follow Aiolith on Google
Get more industrial cleaning guides and equipment insights from Aiolith.
