AI30 Dry Ice Blaster: Clean Ink & Glue from Printing Press Rollers

Updated August 2026

Why Printing Press Rollers Are Difficult to Clean

Ink, adhesive and production residue can build up on rollers, gears and surrounding press components. Manual wiping and chemical cleaning may require repeated labor and can create additional solvent-handling and disposal steps.

The AI30 dry ice blaster is a waterless, non-abrasive cleaning option for suitable printing and packaging equipment.

Current AI30 Technical Profile

• Power: 110 V / 60 Hz
• Hopper: 44 lb (20 kg)
• Dry ice output: 0.66–1.32 lb/min
• Pellet size: 3 mm or smaller
• Working pressure: 87–116 PSI
• Machine air demand: 71–141 CFM
• Indoor compressor guidance: about 80 CFM practical minimum; 90–120 CFM recommended for regular use

Compressor selection should be based on sustained CFM at the required PSI, not a universal horsepower rule.

Where Dry Ice Blasting Can Help

• Ink and adhesive buildup on compatible roller surfaces
• Glue residue around packaging equipment
• Production dust and contamination around mechanical assemblies
• Maintenance tasks where adding water is undesirable

Always test the process on the actual roller or coating because material compatibility and surface condition vary.

What It Does Not Replace

The AI30 is not abrasive-ready and is not intended for heavy corrosion removal or surface profiling. If the job requires aggressive removal of bonded rust or thick coatings, evaluate the abrasive-ready AI50 or another appropriate surface-preparation method.

FAQ

What compressor is required?

The AI30 operates at 87–116 PSI with machine air demand of 71–141 CFM. For regular indoor use, about 80 CFM is the practical minimum and 90–120 CFM is recommended. Verify sustained output from the compressor manufacturer’s data.

Will dry ice blasting always be safe for every printing roller?

No universal claim is appropriate. Roller materials, coatings and contamination differ, so test a small area and follow the equipment manufacturer’s maintenance guidance.

Conclusion

Dry ice blasting can be useful for printing and packaging maintenance when the priority is waterless contamination removal with minimal added cleaning media. Correct application fit and air supply are more important than compressor horsepower alone.