Can You Use a 29.2V 25A LiFePO4 Charger for a 24V Tricycle Battery?

The current AIOLITH 29.2V 25A LiFePO4 charger can only be used with an electric tricycle battery if the actual battery pack matches the charger’s electrical and connection requirements. The fact that a tricycle is labeled “24V” is not enough to establish compatibility.

First Check: Is the Battery LiFePO4?

Electric tricycles can use lead-acid, AGM, LiFePO4 or other lithium-ion chemistries. The current AIOLITH charger is intended for compatible nominal 24V LiFePO4 battery systems. Do not use it with a different chemistry unless the battery and charger documentation explicitly support that combination.

Second Check: Does the Battery Require 29.2V Charging?

The charger’s output is 29.2V DC. Confirm that the tricycle battery manufacturer specifies a 29.2V charging profile. Nominal 24V packs can still have different required charging voltages depending on chemistry and cell configuration.

Third Check: Can the Battery Accept 25A?

The charger can supply up to 25A. Check the battery manufacturer’s recommended and maximum charging current and the BMS charging-current limit. A smaller battery may not permit a 25A charging rate.

Fourth Check: Connector and Polarity

The current charger uses a 50A Anderson connector. Confirm connector type, polarity and cable requirements before use. Do not assume two matching connector housings are wired identically.

Current AIOLITH Charger Specifications

• 100–240V AC input
• 29.2V DC output
• 25A maximum charging current
• 600W rated power
• Three-stage charging
• IP67 enclosure rating
• 50A Anderson connector
• -31°F to 158°F (-35°C to 70°C) listed working-temperature range
• 12-month warranty

Does AIOLITH Specifically List Electric Tricycles?

No. Electric tricycles are not currently listed as a specific intended application on the charger product page. That means compatibility must be verified from the actual battery pack rather than from the vehicle category.

A Simple Compatibility Checklist

1. Battery chemistry is LiFePO4.
2. Battery manufacturer specifies 29.2V charging.
3. Battery/BMS permits up to 25A.
4. Connector and polarity match.
5. Installation environment and charging procedure are compatible.

Bottom Line

The AIOLITH 29.2V 25A charger may work with some nominal 24V LiFePO4 tricycle batteries, but it should not be presented as a universal tricycle charger. Verify the battery specification first.

See the current 29.2V 25A LiFePO4 charger product page for current product details.